iconGuaranteed In Stock & Intelligent Buying Advice

icon 866-266-7638

Top 100 Items

Top 100 Items (68 Items)

Page
per page
Set Ascending Direction
  1. HARDING ENERGY INC FW 1299/15.0727 BATTERY CHARGER

    HIGH QUALITY FOUR AA AND AAA NIMH BATTERY CHARGER

    Model FW 1299/15.0727. This is a high quality battery charger made for Harding Energy Inc. Can recharge either 4 x AA or 4 x AAA NiMH cells or any combination of those sizes. Charge rate is 250ma and maintenance (trickle rate) is 95ma. Ultra high quality unit manufactured in China to US specs. C-UL approved. Charge indicator LED displays on-charge and standby charging modes. Automatic Smart - Charge circuit converts from fast to maintenance charge. Batteries in photo are not included.

  2. MABUCHI FC-130SM-17909A 12VDC MOTOR

    MABUCHI FC-130SM-17909A 12VDC 1/16" SHAFT - SEMI FLAT MOTOR IS IDEAL FOR RC APPLICATIONS SCIENCE FAIRS, SCHOOL PROJECTS

    We have just acquired a large quantity of 12VDC Mabuchi FC-130SM-17909A 1" x 0.6" semi flat motor with 2.0mm (.08") diameter 1.5mm (1/16") long flatted shaft. We do not have the full specs on this motor, but check the spec sheet on similar models (different voltage) by clicking on the "more info" icon. Photo on spec sheet shows long shaft - these units have a 1/16" long shaft - making them ideal for ultra-compact rc and science fair projects. This unit features 3 pole construction, carbon brushes, anisotropic magnets and low noise construction. Coil is 179 turns of 9mm dia wire. Originally used in automotive applications. TEMPORARY SPECIAL!

  3. SHELL STO.4-XI SOLAR CELL, 60MM X 60MM X 2MM

    3.2 VOLTS DC 80MA CIS SOLAR CELLS - TEMPORARY SPECIAL!!!!

    These are thin-film Copper Indium Diselenide (CIS) solar cells. Recent production, first quality, made by a major solar manufacturer. 60mm x 60mm x 2mm thick (2.4" x 2.4" x .08") The active semiconductor material is deposited on the front of the glass, tinned ribbons are bonded to the edges, then the whole cell is covered with clear tough plastic to protect the cell and ribbon. They are environmentally protected and ready to use. You just solder to the ribbon and mount them in your project. The cells put out about 4.5VDC open circuit and about 100MA short circuit. Maximum power of the ones tested is about .25 watt (80MA at 3.2VDC). CIS is the most stable and rugged of the thin film solar technologies and is about twice as efficient as amorphous silicon. It is more efficient under cloudy or partial shade conditions than crystalline silicon. CIS is also radiation resistant, and therefore often used in spacecraft applications. You can connect them in series for more voltage and in parallel for more current. These should be good for walkway lights, battery charging, remote instrumentation or data loggers, educational projects and other DC electrical applications. Unlike amorphous silicon panels, CIS panels do not degrade due to sunlight exposure. In fact after at least 2 hours of exposure to sunlight of at least 1/2 standard intensity, the output will increase by about 10%. With the first exposure, the semiconductor material is annealed and the output is then stable at the higher level. (This is called light soaking). We have a very large quantity for immediate sale. TEMPORARY SPECIAL!!!! $1.00 ea in 1000 lot!

  4. SYMBOL TECHNOLOGIES MC9000 POWER SUPPLIES PN 50-14001-004 WORKS ON CRD3100-4000 AND SAC9000-4000

    SYMBOL TECHNOLOGIES MC9000 POWER SUPPLIES PN 50-14001-004 WORKS ON CRD3100-4000 AND SAC9000-4000

    Symbol Technologies MC9000 and CRD3100-4000 power supplies. 12VDC/9AMP output. Symbol Technologies p/n 50-14001-004. Model SYM04-1. AC input; 100-120VAC/200-240VAC. 50 to 60Hz. 3.0A/1.5A. UL/CSA (Level 3) (N16601) . Also approved for Switzerland and 4 other countries. Built-in fan. High quality industrial grade construction. Unit has internal voltage control pot which allows output voltage level control, but we do not know its +- range. Nominal output is 12VDC, highly regulated. Built in cooling fan. Case is 7"L x 3-3/4"W x 2"H. Accepts standard IEC power cord - included. Output cable also included. Made in Malaysia. Individually cartoned. Original OEM cost from Symbol Technologies $75. Call Ted at 1 800 341 6468 to discuss your quantity requirements. Shipping Weight 2.25 pounds. MORE INFO

  5. PACK OF TEN 1.2 VOLT 1500MAH SUB-C CELLS ARE EXCELLENT FOR REBUILDING TOOL BATTERY PACKS, R/C APPLICATIONS!

    PACK OF TEN 1.2 VOLT 1500MAH SUB-C CELLS ARE EXCELLENT FOR REBUILDING TOOL BATTERY PACKS, R/C APPLICATIONS!

    This is the deal of deals! Typically a single 1500mah nickel cadmium sub-c cell will sell between 2.50 and 3.95 per cell. This offer is for a pack of 10 (assembled and shrink wrapped) with an output of 12vdc @ 1500mah. Can easily be disassembled to yield 10 individual sub-c cells. This shrink-wrapped pack of 10 cells is housed in an easily opened (screw assembled) high impact plastic housing and can be used as-is by just attaching to wires to the easily accessible external terminals. Packs were manufactured in 2006 and 2007 and are very fresh. Original application was for a portable lighting device. THIS IS A DEAL!!! Individually cartoned.

  6. HIGH QUALITY FOUR AA AND AAA NIMH BATTERY CHARGER

    HIGH QUALITY FOUR AA AND AAA NIMH BATTERY CHARGER

    Model FW 1299/15.0727. This is a high quality battery charger made for Harding Energy Inc. Can recharge either 4 x AA or 4 x AAA NiMH cells or any combination of those sizes. Charge rate is 250ma and maintenance (trickle rate) is 95ma. Ultra high quality unit manufactured in China to US specs. C-UL approved. Charge indicator LED displays on-charge and standby charging modes. Automatic Smart - Charge circuit converts from fast to maintenance charge. Batteries in photo are not included.