AC Gearhead Motors

With a CW rotation, this 120VAC, 4A, 62RPM Gearmotor has a open style aluminum housing and 4 mounting holes for installation. 1/2" Shaft diameter, 1-1/2" hollow threaded, and a overall size of 2-1/2" x 2" x 5-3/4". Over 2000 units available. Looking for offers on quantity.

With a CW rotation, this 120VAC, 2A (no load), 80RPM inline shaft gearmotor has 4 mounting holes for face mount installation. 3/8" Shaft diameter x 3/4", and a overall size of 3-1/8" x 2-1/2" x 4-3/8". Over 600 units available. Looking for offers on quantity.

Inline 115VAC, 135RPM, 0.1A, reversible gearmotor with 58 in oz torque and a gear ratio of 2:1 has a 1.25 mFd 440VAC run capacitor included. Shaft size of 1/4" diameter x 3/8" and an overall size of 1-7/8" x 2-3/8" x 2-3/8". 2 tapped 4mm holes allow an easy installation. Looking for offers on quantity.

This 115VAC, 743RPM, 9.9A inline gearmotor with open type enclosure features a continuous CW rotation, 440W - 44in lbs torque and a gear ratio of 2.42:1. Shaft size of 16mm x 3-1/2" with keyway, and a mounting face of 3-5/8" x 3-5/8". Overall size of 5-1/2" x 10-1/2" x 5-1/2" and comes with run and start capacitors (relays not included). Looking for offers on quantity.

This list contains a wide selection of circuit breakers, magnetic flow meters, solenoids, switches and much more. May be subject to a minimum order requirement. Click MORE INFO to view the list in it's entirety.

NCR's AXIOHM Thermal/Impact Ptr W/2 Color, USB/RS232, MICR, Knife Model A760-2215

120VAC inline parallel shaft Brevel gearmotors. 80 RPM, 2 amps, CW rotation, duty intermittent. Shaft: 3/8" diam. x 3/4" w/ flat. 4 hole face mount 1-9/16" x 1-1/4" centers. Overall dimensions: 3-1/8" x 2-1/2" x 4-3/8".

Surplus Dynetic Systems 220028D motors and gearhead assemblies for use with Baxter Travenol peristaltic blood pumps. Specifications: 36V 3.5A generator volt graduation 14.0 DCV/KRPM. 13 available.

Molon model LIM-30146-3 135 RPM inline gearmotor, external 1.25 mFd, 440 VAC run capacitor included. 115 VAC, 0.1 amps. Reversible rotation, duty intermittant. Torque: 58 in oz. approx, gear ratio 2:1. Mount: two 4mm tapped holes on face, 2-11/16" c/c. Shaft: 1/4" dia. x 3/8" w/ flat, overall size: Size 1-7/8" x 2-3/8" x 2-3/8".

Bodine Electric inline gearmotor includes run & start capacitors. Requires relay (not incl.) for start capacitor. Voltage: 115 AC, amperage: 9.9 Amps, power: 440 Watts, torque: 44 in - lbs. Continuous duty, CW rotation, open enclosure. Overall size: 5-1/2" x 10-1/2" x 5-1/2". Shaft: 16MM x 3-1/2" w/keyway. Mount: face 3-5/8" x 3-5/8".

Merkle-Korff 3715UP-250 120VAC compact gearmotors. Speed: 15 RPM, voltage: 115 AC, amperage: 2.7 Amps, power: 97 Watts @ idle. Thermally protected, shaded pole motor. Rotation CW, duty Intermittent (1 minute max on time). Face Mount 3 untapped bosses. Metal gear housing. Shaft: threaded end 5/16"-18 LH; base end 3/8" dia. x 3/8" long; overall length 15/16". Dimensions: 3-3/8" x 2-1/2" x 4".

43 x Dayton 6Z404 Parallel Shaft AC Gearmotors for sale. Motors are used and in good working condition. These motors deliver 18 RPM, Input Power 1/3 HP, Gear Ratio 95:1, Voltage @ 60 Hz 208-230/460. Shaft: 3-3/4" x 1-1/2". Weight: 27 pounds.

30 RPM 115VAC (.03A) gearmotor. New factory surplus. gearmotor. Motor typically rotates CW, by design it will sometimes rotate CCW. Rotation varies. Constant duty. Shaft 5/32" square, 1/4" long. Four bolt mount on 2-1/4" B.C. Overall size 2" dia. x 7/8" long. 1,500 available.

Reversible miniature Haydon gearhead motor. Delivers 3.6 RPM at 20VAC. 0.125" diameter. The shaft is 0.30" long. The motor is 1.07" diameter x 1.23" long. Four 6" leads. Two leads for each direction.

26 RPM 45 VAC GEARMOTOR. Removed from service. Inline parallel shaft gearmotor. Mounting holes are drilled and tapped. Specifications; RPM 26, Voltage 45 VAC, Amps 0.600 (no load), Rotation CW, Duty Int. 4 hole face mount on 1-9/16" x 1-5/8" centers. Shaft 3/16" diam. x 5-1/4" w/ 10-32 threaded end. Overall Size 1-1/4" x 2-1/2" x 4-7/8" weighs 2 lbs.