AC Motors

A list of a wide varirty of Baldor motors from coupled motors to industrial to AC motors. Check out our list.

Looking for offers on the following: Reliance Electric Motor P/N: P56X3002. Spec: 34K013-0116G5, 0.33HP, 208-230/460-480 Volts, 1725RPM, 56C Frame, 60Hz, 3PH. And Ironman gear reducer P/N: GRG-HM-821-10-H1-140-20 / GRG8210527.20. Additional pictures available upon request.

New TECO-Westinghouse TEFC Electric Motors 575V, 60Hz, 3Ph: QTY-25 rated at 40 HP, 885 RPM QTY-12 rated at 7.5 HP, 1170 RPM QTY-6 rated at 5 HP, 1170 RPM Looking for offers on quantity.

Used 300HP General Electric 4000V Motor. Model: 144347E9K2, Frame: 588, 1785RPM, Amp: 38, CSA Enclosure: TEFC, 3 phase. Pulled from service for upgrades. Sold as-is. Looking for offers.

With a CW rotation, this 120VAC, 4A, 62RPM Gearmotor has a open style aluminum housing and 4 mounting holes for installation. 1/2" Shaft diameter, 1-1/2" hollow threaded, and a overall size of 2-1/2" x 2" x 5-3/4". Over 2000 units available. Looking for offers on quantity.

With a CW rotation, this 120VAC, 2A (no load), 80RPM inline shaft gearmotor has 4 mounting holes for face mount installation. 3/8" Shaft diameter x 3/4", and a overall size of 3-1/8" x 2-1/2" x 4-3/8". Over 600 units available. Looking for offers on quantity.

Inline 115VAC, 135RPM, 0.1A, reversible gearmotor with 58 in oz torque and a gear ratio of 2:1 has a 1.25 mFd 440VAC run capacitor included. Shaft size of 1/4" diameter x 3/8" and an overall size of 1-7/8" x 2-3/8" x 2-3/8". 2 tapped 4mm holes allow an easy installation. Looking for offers on quantity.

This 115VAC, 743RPM, 9.9A inline gearmotor with open type enclosure features a continuous CW rotation, 440W - 44in lbs torque and a gear ratio of 2.42:1. Shaft size of 16mm x 3-1/2" with keyway, and a mounting face of 3-5/8" x 3-5/8". Overall size of 5-1/2" x 10-1/2" x 5-1/2" and comes with run and start capacitors (relays not included). Looking for offers on quantity.

158 AC Motors by AO Smith, Marathon, Baldor, Worldwide electric, Tatung, Reliance/Rockwell, and US Electric. Click on the "MORE INFO" icon to view this list of AC Motors. Looking for take all offers.

Cutler Hammer S801 Series S801V85N3S - Soft start reduced voltage motor starter with standard control interface. Style 92EA10027C0001C, 850 FL Amps, non-reversing, open type. MOD: Max HP: 900 at 600V 3-Ph. New. Looking for offers.

Click on the MORE INFO icon to view this list of 81 AC electric motors by GE, Emerson, Baldor, Leeson, and WEG. AC motors range from 1HP to 100HP. Looking for partial or take all offers.

GE dripproof resilient base fan blower single shaft electric motors, model: K549 5K48UN3057. Rated at 1.5 - 1/2 HP, 460V, 3PH, 60Hz, 1725/1140 RPM, FR. 56H, Code L, 2.3/1.4 Amps. 15 units available, most are new still in original box. Looking for offers on quantity.

Click on MORE INFO to view this extensive list of industrial parts. Motors, gearboxes, sensors, modules, and much much more.

Click on MORE INFO to view this list of surplus Reliance electric motors that we have available.

The following Baldor motors are available on a first-come basis. Photo shown is for illustrative purposes only.Qty. 1 - CM3542 Baldor AC motor 0.75 hp, 230/460 Volts, 1725 rpmQty. 1 - VM3542 Baldor AC motor 0.75 hp, 208-230/460 Volts, 1725 rpm

220VAC, 1.9 amp dual shaft motors by RMR Corp, with rotation facing shaft on lead end. 1/8 HP, 1000/1200 RPM, CW rotation. Single phase, continuous duty. 3 bolt mount. Requires 5 mfd capacitor. Dimensions: 5-1/2" dia. x 4" with 1/2" dia. x 2 1/2" shaft and 1/2" dia x 1 3/8" shaft.

Fasco 115VAC, 1,110 RPM 3-speed fan motors. 2.5 amp, 1/20 HP, 1,110/1,010/915 RPM. Continuous duty, clockwise rotation facing shaft on lead end. 3 bolt mount. Dimensions: 5-1/2" dia. x 5-1/2" with 1/2" x 2" x 2-1/4" shafts. Requires 4 mfd capacitor (not included).

115VAC 1070 RPM dual-shaft motors by Fasco. Two-speed, great replacement for blowers and fans. Single phase, air over continuous duty. 1/12 HP, 1.0 amps, CW rotation. ODP enclosure, mount 3 bolt 7-1/2 B.C. 3 bolt mount. Dimensions: 5" dia. x 4". Shafts: 1/2" dia. x 4-3/4 and 1/2" dia. x 1-7/8". Unit requires 3 mfd capacitor (not included).

208-230VAC, 0.8 amps dual-shaft motors by A.O. Smith. 1180 RPM at 60 Hz/900 RPM at 50 Hz. Rotation: CCW. 3 bolt mount. Dimensions: 5-1/2" dia. x 4-1/2" with 1/2" x 2-1/2 and 1/2" x 3-3/4" shafts.

460VAC Vertical hollow shaft motors by US Electric: - 150HP 1800RPM 230/460 VOLT WP1 444TP FRAME - 200HP 1800RPM 230/460 V0LT WP1 445TP FRAME

One unit available of each of the following vertical hollow shaft motors by Teco-Westinghouse: - VH1504 150HP, 1800RPM, 460V, WP1 PUMP MOTOR - VH2004 200HP, 1800RPM, 460V, WP1 PUMP MOTOR - VH2504 250HP, 1800RPM, 460V, WP1 PUMP MOTOR - VH3004 300HP, 1800RPM, 460V, WP1 PUMP MOTOR - VH3504 300HP, 1800RPM, 460V, WP1 PUMP MOTOR Specs available on request.

120VAC inline parallel shaft Brevel gearmotors. 80 RPM, 2 amps, CW rotation, duty intermittent. Shaft: 3/8" diam. x 3/4" w/ flat. 4 hole face mount 1-9/16" x 1-1/4" centers. Overall dimensions: 3-1/8" x 2-1/2" x 4-3/8".